Multi- Cam

We are helping homeowners to put things together after the hurricanes hit Lake Charles. One customer was told by a contractor they would have to “square off” their arched room […]

A customer has requested 2 Fleur de lis keys to made from Extira for placement above his garage door openings. The pieces will be center of the overhead door and […]

I decided to make my little granddaughter a rocking chair. She is a mess…at the ripe old age of 1…she is climbing and into everything. I thought if I made […]

Project produced with EnRoute Pro and CNC router by MultiCam. This is a project we did a while back; I think you will find it interesting. One of our customers […]

We made corbels today…these will provide support for the mantle in our earlier project. The dimensions for the 2 corbels are… 10 ¾” tall, 5 ½” wide with a depth […]

A customer requested we mill a de-nailed pine beam for use as a rustic fireplace mantle. The beam measurements were…length 108”, width 12” and a thickness of 6 ½”. The […]

We finished our gate project today. After removing the clamps, we ran the pieces through our sander. This removed the glue residue and evened up any height differences at the […]

Carvings are one of my favorite things to do. I have carved many scenes with my MultiCam CNC router but none as interesting as the two Crucifix projects we are […]

A customer has requested that we supply framing for (2) 36” elliptical arches with a 9” rise. The frames will be installed in 36” openings and sheetrock will be applied […]

Today was the day for putting the gates together! We dry fitted our components to verify our measurements & began the process of assembling the gates. The first picture shows […]

A customer has requested our assistance in constructing new gates for 3 courtyard openings. The project will consist of 1 opening that is 6 feet wide by 8 feet tall […]

We made this Cypress Batten Shutter to be used at a customers camp. The project measured 35 1/2 “ wide x 39 ½” tall. We glued up a panel 44” […]